LiFePO4 battery FBTACH model 18650 with capacity 1500mAh and voltage 3,2V.
Home
There are 81 products.
Active filters
This active balancer, HELTEC 4S 5A, is an innovative device for balancing and optimum performance of LiFePO4, Li-Ion and LTO batteries. The balancer is equipped with a new ultra-low internal resistance MOS, which enables efficient battery voltage balancing. The balancing current can be adjusted in the range of 0-5A. The accuracy of the balancing voltage is less than 5mV.
ATTENTION, THIS BALANCER DOES NOT HAVE BMS FUNCTION. THIS PRODUCT ONLY EXTENDS THE FUNCTIONALITY OF THE EXISTING BMS.
- Jiabaida
TheLCD one-button display is used as a display peripheral of the JBD BMS for use in the production of lithium composite batteries.
*Product photo is illustrative
- Jiabaida
The single-button LCD display serves as the display peripheral for the JBD brand BMS device, designed for use in the production of assembled lithium batteries. In the list below, choose the appropriate type of display communication with BMS that you require, either UART or RS485.
*Product image is for illustration purposes only
This active balancer, HELTEC 8S 5A, is an innovative device for balancing and optimizing the performance of LiFePO4, Li-Ion, and LTO batteries. The balancer is equipped with a new ultra-low internal resistance MOS, which enables efficient voltage balancing between individual batteries. The balancing current can be set in the range of 0-5A. The balancing voltage accuracy is lower than 5mV.
ATTENTION! THIS BALANCER HAS NO BMS FUNCTION. THIS PRODUCT ONLY EXTENDS THE FUNCTIONALITY OF CURRENT BMS.
*Product photo is illustrative
LiFePO4 battery FBTACH model IFR18650 with capacity 2000mAh and voltage 3,2V.
This active balancer, HELTEC 16S 5A, is an innovative device for balancing and optimizing the performance of LiFePO4, Li-Ion, and LTO batteries. The balancer is equipped with a new ultra-low internal resistance MOS, which enables efficient voltage balancing between individual batteries. The balancing current can be set in the range of 0-5A. The balancing voltage accuracy is lower than 5mV.
ATTENTION! THIS BALANCER HAS NO BMS FUNCTION. THIS PRODUCT ONLY EXTENDS THE FUNCTIONALITY OF CURRENT BMS.
*Product photo is illustrative
Li-Ion battery SAMSUNG model 18650 with a capacity of 2500mAh and a maximum discharge current of 20A.
- Jiabaida
TheLCD touchscreen is used as a display peripheral of the JBD BMS for use in the production of lithium composite batteries.
LiFePO4 battery FBTACH model IFR26700 with capacity 5000mAh and voltage 3,2V.
- Jiabaida
TheLCD touchscreen is used as a display peripheral of the JBD BMS for use in the production of lithium composite batteries.
Li-Ion battery SONY model 18650 with capacity 2600mAh and maximum discharge current 30A.
LiFePO4 battery LTT model IFR32700 with capacity 6000mAh and voltage 3,2V.
Li-Ion battery SAMSUNG model 18650 with a capacity of 3000mAh and a voltage of 3.6V.
Li-Ion battery SONY/MURATA Konion TOP BUTTON model 18650 with capacity 3120mAh and maximum discharge current 30A.
Li-Ion battery SONY/MURATA model 18650 with capacity 3120mAh and maximum discharge current 30A.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
BMS 10A with active balancer 0,6A for 4S LiFePO4 battery cells.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
BMS 20A with active balancer 0,6A for 3S Li-Ion battery cells.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
TOMZN TPNL-32 C16 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
TOMZN TPNL-32 C10 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
Li-Ion battery 21700 model INR21700-48G with capacity 4800mAh and voltage 3,6V.
TPNL-32 C25 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
Li-Ion battery SAMSUNG model 21700 with a capacity of 5000mAh and a maximum discharge current of 35A.
The TZG40-PV 1000VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 800VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 500VDC is a surge protection device with even faster protective response in the event of a lightning strike.
- Bluetooth
- Jiabaida
The JBD Smart BMS 7S~21S 200A is a protection circuit with balancer for 7 to 21 LiFePO4 cells that provides protection, control and management of battery parameters and processes. The BMS cannot be connected in parallel.
TZG40-C 275VAC is a device for surge protection of the network and lightning.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
TOM7Z is an MCCB circuit breaker for photovoltaic system overload and short circuit protection.
Circuit breaker TOMZN 1P MCB DC 250V 200A against overload for solar photovoltaics DC.
Li-Ion battery SAMSUNG model 18650 with a capacity of 3400mAh and a voltage of 3.6V.
Circuit breaker TOMZN 1P MCB DC 250V 125A against overload for solar photovoltaics DC.
- Bluetooth
- Jiabaida
The JBD Smart BMS 8S~20S 200A is a protection circuit with balancer for 8 to 20 LiFePO4 cells that provides protection, control and management of battery parameters and processes. The BMS cannot be connected in parallel.
TOMZN 2P MCB DC 600V 125A overload circuit breaker for DC solar photovoltaics.
*Product photo is illustrative
TOMZN 10x38mm 1000V 10A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10x38mm 1000V 15A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10×38mm 1000V 20A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
TOMZN 10×38mm 1000V 30A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
Fuse disconnector TOMZN DC 1P serves for retention of DC fuse 10x38mm. Suitable for electrical distribution of high voltage solar photovoltaics. It serves as a basic protection of gpV photovoltaic system.
*product photo is illustrative
Fuse parallel disconnector TOMZN DC 2P is used for retention of DC fuses 10x38mm. Suitable for electrical distribution of high voltage solar photovoltaics. It serves as the basic protection of the gpV photovoltaic system.
Fuse disconnector TOMZN 4P PV DC 1200V 32A is a device designed for solar switchboards. It is equipped with a flexible and durable rotating handle.
The TOMZN three-phase electricity meter with Wifi function is a modern device for monitoring electricity consumption. It features an intelligent bidirectional energy meter with timer function and kWh consumption monitoring.
*product photo is illustrative
BMS 20A with active balancer 0,6A for 4S LiFePO4 battery cells.
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and to protect them.
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and to protect them.
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and to protect them.
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and to protect them.
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and to protect them.
Switchboard TOMZN TOPV18-2-2-2 1000V DC - offset.
Circuit breaker TOMZN 1P AC MCB 25A 230V type C against overload.
Circuit breaker TOMZN 1P AC MCB 10A 230V type C against overload.