- Bluetooth
- Jiabaida
Prismatic cell traction LiFePO4 battery with 134Ah and 3.2V capacity for universal use.
BMS 8S-20S LiFePO4 200A 3.6V Smart Bluetooth
BMS8S20SLIFE200BT
The JBD Smart BMS 8S~20S 200A is a protection circuit with balancer for 8 to 20 LiFePO4 cells that provides protection, control and management of battery parameters and processes. The BMS cannot be connected in parallel.
Price: Kč2,499
Price excl. VAT: Kč2,065
Price excl. VAT: Kč2,065
Price history
Lowest price in the last 30 days before discount Kč2,499
Smart BMS with balancer, 200A 8~20S LiFePO4 Jiabaida
BMS with integrated Bluetooth for precise real-time battery monitoring. JBD BMS provides battery cell protection, capacity calculation and balancing. Before first use, the negative battery terminal must first be connected to the BMS. Then the balance connector, which is already connected to the individual battery cells, needs to be connected. Failure to follow this sequence may result in permanent damage to the BMS.
The intelligent BMS (battery management system) acts as a protection circuit specifically designed for strings of 8 to 20 LiFePO4 battery cells. The BMS includes a balancer that effectively adjusts the voltage of each cell. The BMS hardware is embedded between two aluminum alloy plates that provide good heat dissipation in addition to physical protection.
Advantages of JBD Smart BMS 8~20S 3.6V 200A LiFePO4
- selectable number of LiFePO4 battery strings
- extra fine B- and C-cables high voltage resistant
- Bluetooth communication with mobile app
- overcharge and over-discharge protection
- over-current charging/discharging protection
- temperature protection
- balancing function
- capacity calculation (SOC)
- sleep mode
Features
- Dimensions (W × H × D)
- 202 × 18 × 76 mm
- Balancing current
- 50 mA / 150 mA
- Operating temperature range
- -20 °C ~ 75 °C
- Connectivity
- Smart Bluetooth
- Constant charging current
- 200 A
- Constant discharge current
- 200 A
- Number of articles in the series
- 8s
9s
10s
11s
12s
13s
14s
15s
16s
17s
18s
19s
20s
- Cell voltage range: 2.20~3.75V
- Continuous charging current: 200A
- Continuous discharging current: 200A
- Short-circuit protection tripping delay: max 200 μs
- Short-circuit protection tripping condition: Load tripping and recovery after 60s ± 20S
- Voltage difference limit for balancing trip: 15mV
- Balancing current: min 50mA / max 150mA
- Internal resistance of discharge circuit: ≤10mΩ
- Self current consumption in normal mode (with load): ≤20mA
- Idle mode self-current consumption (without load): ≤250uA
- Idle mode switchover delay and conditions: after 1min ± 20s without current load, communication or protection mode
- Normal operating temperature range: -20°C ~ 75°C
- Storage temperature range at relative humidity <70%: -5°C ~ 40°C
- Communication: UART, Bluetooth
The JBD Smart BMS 8S~20S 200A is a protection circuit with balancer for 8 to 20 LiFePO4 cells that provides protection, control and management of battery parameters and processes. The BMS cannot be connected in parallel.
You might also like
Prismatic traction LiFePO4 cell with capacity 304Ah a 3,2V for universal use. Grade A EVE quality.
Prismatic LiFePO4 traction cell with 280Ah and 3.2V capacity for universal use. Class A+ EVE quality.
8 other products in the same category:
- Bluetooth
- Jiabaida
Device – BMS 5S-24S LiFePO4 200A for management of battery charging and discharging processes, battery cell balancing and protection.
Balancers cannot be connected in parallel.
*Product photo is illustrative
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection. Not intended for paralell connection.
- Bluetooth
- Jikong
Smart Active Balance BMS from JIKONG. For 4S to 8S LiFePO4 or Li-Ion batteries. BMS 100A / balance current 0.6A, with integrated Bluetooth for communication with mobile app.
- Bluetooth
- Daly
Device - BMS 8S LiFePO4 200A for managing charging and discharging processes of batteries, balancing battery cells and their protection.
- Bluetooth
- Jikong
Smart Active Balance BMS from JIKONG. For 8S to 24S LiFePO4 or Li-Ion batteries. BMS 60A / balance current 0.6A, with integrated Bluetooth for communication with mobile app.
- Bluetooth
- Jiabaida
Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.
- Bluetooth
- Jikong
This BMS with active balancer, the JIKONG S-24 150A, is a premium control system for high capacity LiFEPO4, Li-Ion, LTO batteries. It is compact, easy to use via Bluetooth (built-in) via mobile app (Android, iOS). It monitors battery status, allows adjustment of discharge and charge parameters. Suitable for use in electromobility, backup power sources, solar power plants or energy storage systems.
Do not forget to order an RS485 converter to ensure the necessary data communication.