The JBD Smart BMS 7S~21S 200A is a protection circuit with balancer for 7 to 21 LiFePO4 cells that provides protection, control and management of battery parameters and processes. The BMS cannot be connected in parallel.

Fixed 100Wp photovoltaic panels in silver frame with high efficiency even in low light conditions.

Composite battery – AkuBox 120Ah 51.2V made of traction LiFePO4 cells including com interface, BMS and switch in the metal box.

DIY power bank with LCD display for 10 Li-Ion 18650 cells (not included).

The 8Ah LeadAcid-6V traction battery, which has an electrolyte bonded in a fiberglass AGM fleece, provides maximum energy and maintenance-free performance throughout its long life.

LiFePo4 battery CBAK model 32140FS with capacity 1500mAh and voltage 3,2V.

Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.

Black plastic box for battery production.

Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.

Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.

Simple rocker switch with LED.

DIY wireless power bank with LCD display for 5 Li-Ion 18650 cells (not included).

Practical set - AkuSet® 134Ah 25,6V Smart Bluetooth from traction LiFePO4 cells including BMS in one package with cable connector, DC connector and lugs.

PH1800 Plus series hybrid solar inverter, it can realize self-consumption and feed-in to the grid from solar energy with best solution according to your setting. During the daytime solar power can run your home appliances and if there is extra solar power it will feed-in to the grid or you can choose to save them on the battery to backup when power failure or nighttime. Also consider purchasing a wireless WiFi module.

This jumper serves as a connection material for serial connection of EVE LiFePo4 batteries with 314Ah capacity and M6 adapters. No need to buy AL-CU (CUPAL) washers.

Connecting strip made of pure nickel, size 5×0,15×200mm for spot welding of batteries. The package contains 50pcs of these strips.

TheLCD touchscreen is used as a display peripheral of the JBD BMS for use in the production of lithium composite batteries.

Powerful 2000W 24V/230V inverter with pure sine wave, protection system, USB-A port, integrated LCD display and Smart Fan cooling.

Equipment designed to monitor and control the processes of charging, balancing and discharging batteries and their protection.

Powerful 4000W 24V/230V inverter with pure sine wave, protection system, USB-A port, integrated LCD display and Smart Fan cooling.

Powerful 3000W 24V/230V inverter with pure sine wave, protection system, USB-A port, integrated LCD display and Smart Fan cooling.

Device designed for charging LiFePO4 cells.

Practical set - AkuSet® 100Ah 48V Smart Bluetooth from traction Li-Ion cells including BMS in one package with cable connector, DC connector and lugs.

Practical assembly - AkuSet® 120Ah 24V Smart Bluetooth from traction LiFePO4 cells, which are initialized, including BMS in one package with a connecting cable terminated with lugs.

Circuit breaker TOMZN 1P AC MCB 25A 230V type B against overload.

This jumper serves as a connecting material for series connection of EVE GRADE A+ LiFePo4 batteries with 230Ah capacity and M6 adapters. No need to buy AL-CU (CUPAL) washers.

Black ABS plastic box for battery set assembling.

Device - DALY SMART Balancer Active 4S for balancing cell voltage and monitoring energy transfer among them.

ATTENTION! THIS BALANCER HAS NO BMS FUNCTION. THIS PRODUCT ONLY EXTENDS THE FUNCTIONALITY OF CURRENT BMS.

Set of holders for fixing four LiFePO4 cells - 230Ah, 280Ah, 304Ah or 314Ah.

This jumper serves as a connecting material for LiFePO4 147Ah cells. No need to buy AL-CU (CUPAL) washers.

Practical assembly - AkuSet® 150Ah 48V Smart Bluetooth from traction Li-Ion cells including BMS in one package with cable connector, DC connector and lugs.

Regulated laboratory power supply with precisely adjustable DC current and voltage. Not intended for battery charging. Damage to the product will occur in the event of such a sustained load.

Soldering tip 900M-T-K, with an angled tip length of 0.5mm at a 45° angle, which is compatible with most of the most commonly used microstrips and soldering pens.

Connecting strip made of pure nickel, size 10×0,15×200mm for spot welding of batteries. The package contains 50pcs of these strips.

Black pocket mini powerbank and DIY battery charger, for two 18650 Li-Ion cells (battery not included) with USB and Micro USB ports.

Powerful 300W 12V/230V inverter with pure sine wave, protection system, USB-A port and Smart Fan cooling.

Device - DALY Balancer Active 16S 1A for balancing the voltage of the cells and controlling the energy transfer between them.

ATTENTION, THIS BALANCER DOES NOT HAVE BMS FUNCTION. THIS PRODUCT ONLY EXTENDS THE FUNCTIONALITY OF THE EXISTING BMS.

Connecting strip made of pure nickel, size 10×0,22×200mm for spot welding of batteries. The package contains 50pcs of these strips.

Black DIY pocket mini powerbank and battery charger, for one 18650 Li-Ion cell (battery not included) with USB and Micro USB ports.

Composite battery - AkuBox® 125Ah 48V. Made of traction LiFePO4 cells including active Smart BMS, in plastic box.

Black ABS plastic box for battery set assembling.

Powerful 1000W 12V/230V inverter with pure sine wave, protection system, USB-A port, integrated LCD display and Smart Fan cooling.

Circuit breaker TOMZN 2P MCB DC 440V 63A against overload and short circuit.

Circuit breaker TOMZN 1P AC MCB 10A 230V type B against overload.

Composite battery - AkuBox® 134Ah 25,6V from traction LiFePO4 cells including BMS and switch in metal box.

This device is a multi-functional pure sine wave and high-voltage inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. The inverter can run without battery. Its maximum PV array open circuit voltage can reach 450 V and MPPT voltage is 150 VDC ~ 430 VDC. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. Also consider purchasing a wireless WiFi module.

Device - DALY Balancer Active 4S 5A for balancing the voltage of the cells and controlling the energy transfer between them.

ATTENTION, THIS BALANCER DOES NOT HAVE BMS FUNCTION. THIS PRODUCT ONLY EXTENDS THE FUNCTIONALITY OF THE EXISTING BMS.

Finely stranded 2AWG cable in silicone nickel-plated copper sleeve in black.
Price is for 1 meter.

! Cancellation of the order is not possible if the ordered material has already been modified in any way (e.g. cut) according to the customer's wishes.

DIY 12-cell Li-Ion 18650 wireless power bank with LCD display, including USB-C, Micro-USB, Lightning and 2× USB ports.