• Sale!
  • -Kč8,000
  • Temporarily unavailable
    PowerWall LiFePO4 100Ah 51.2V 100A MUST LP16-48100
    PowerWall LiFePO4 100Ah 51.2V 100A MUST LP16-48100
    PowerWall LiFePO4 100Ah 51.2V 100A MUST LP16-48100
    PowerWall LiFePO4 100Ah 51,2V 100A MUST LP16-48100
    PowerWall LiFePO4 100Ah 51,2V 100A MUST LP16-48100
    PowerWall LiFePO4 100Ah 51,2V 100A MUST LP16-48100

Wall-mounted LiFePO4 battery MUST for PV system

This MUST battery from the LP1600 series has a built-in BMS (battery management system) so you can manage and monitor voltage, current, temperature and other battery information. The BMS also provides active protection functions such as over-discharge, over-charge, over-temperature and over-current protection.


The device supports CAN or RS485 communication for battery upgrades. The battery chemistry is LiFePO4, the battery can benefit from the advantageous properties of such designed batteries such as long life and safety of use. The system can automatically control the charging, discharging and voltage balancing of each battery cell.

Advantages of the LP1600 series wall battery

  • Battery cells are initialized
  • suitable for use in temperature-hungry applications where ambient temperature reaches up to +60°C.
  • low self-discharge rate, no memory effect
  • light weight, compact design and small size
  • flexible configuration of modules in parallel to expand capacity and power
  • 95% discharge depth allowed
  • built-in soft start function

MUST ENERGY

Features

Dimensions (W × H × D)
approx. 580 × 400 × 145 mm
Weight
approx. 44.0 kg
Energy
5120 Wh
Rated capacity
100Ah
Nominal voltage
51.2 V
Brand
MUST
System voltage
48V

Download

Battery compatibility_MUST

Download (238.14KB)

Datasheet_LP1648100 [en]

Download (7.15MB)
  • Rated voltage: 51.2 V
  • Rated capacity: 100 Ah (1C / +25 ° C)
  • Energy: 5120 Wh
  • Communication: CAN2.0 / RS232 / RS485
  • Internal resistance: ≤ 45 mΩ @ 50% SOC
  • Efficiency: > 96%
  • Number of parallel modules allowed: up to 3
  • Recommended charging current: 20 A / 0.2C
  • Maximum charging current: 100 A / 1C
  • Recommended charging voltage: 57.6 V
  • BMS charging cut-off voltage: < 58.4 V (3.65 V / cell)
  • Reconnect voltage: > 57.6 V (3.6V / cell)
  • Balancing voltage: < 57.6 V (3.6 V / cell)
  • Maximum continuous discharge current: 100 A / 1C
  • Maximum discharge current (3 seconds): 110 A / 1.1C
  • BMS discharge cut-off current: 150 A / 1.5C (300ms)
  • Balancing open voltage: 55.2 V (3.45 V / cell)
  • Recommended low voltage disconnect: 44.0 V (2.75 V / cell)
  • BMS discharge cut-off voltage: > 32.0 V (2s) (2.0 V / cell)
  • Reconnect voltage: > 40.0 V (2.5 V / cell)
  • Short circuit protection: 250 μs ~ 500 μs
  • Certifications: CE (battery), UN38.3 (battery), UL1642 & IEC62133 (cells)
  • Shipping classification: UN 3480, class 9
  • Dimension (W x H x D): 580 × 400 × 145 mm
  • Weight: approx. 44.0 kg
  • Terminal type: DIN POST
  • Terminal torque: 9 Nm ~ 11 Nm
  • Case material: SPPC
  • Enclosure protection: IP 20
  • Operating temperature / discharge: -20 °C ~ 55 °C
  • Operating temperature / charging: 0 °C ~ 45 °C
  • Storage temperature: -5 °C ~ 35 °C
  • BMS high temperature cut-off: 65 °C
  • Reconnect temperature: 55 °C
  • Heating foil temperature range: -20 °C ~ 5 °C
  • Foil heating time: approx. 1 hour @ 7.5 A
  • BMS heating foil cut-off: 70 °C

Included in the package: device, manual, bracket for hanging on the wall


  • The following picture shows the wiring method. For a complete home PV system, you need a voltage converter in addition to the solar panels and this battery.

schema zapojeni MUST LP16

See additional documents such as product certificates.

2 other products in the same category: