Simple installation accessories with two USB sockets and a digital voltmeter
Accessories
Needs for wiring and optimal performance of your devices and batteries. Explore our range of BMS and balancers, chargers, power supplies and testers and many other accessories. With our products, you'll always have the confidence that your equipment will operate flawlessly and safely.
There are 144 products.
Accessories for fixing cylindrical accumulators to the group
The electrical and mechanical features of insulators allow the insulated passage of the conductor through the boards of instrument cabinets or switchboards. They can be installed in demanding operating conditions.
The electrical and mechanical features of insulators allow the insulated passage of the conductor through the boards of instrument cabinets or switchboards. They can be installed in demanding operating conditions.
Connecting accessories for high current loads.
Connecting accessories for high current loads.
The Al-Cu washer prevents the transition resistance and temperature of the aluminum-copper joints from increasing. Price is per piece.
Simple installation accessories with digital voltmeter
ON / OFF switch with detent. Pressing the switch closes the C-NC circuit, then tripping the C-NO circuit. Backlight color according to current delivery.
Aluminium connecting piece with connecting material. In the drop-down menu below, select the appropriate jumper for your cell type. The price is per piece of jumper, including connecting material.
Industrial power connectors DC, QLB SurLok 120A 1000V. 2 pairs (female + male) of cable connectors included.
Black ABS plastic box for battery set assembling.
Black plastic box for battery production.
Circuit breaker TOMZN 1P MCB DC 250V 200A against overload for solar photovoltaics DC.
TOMZN 2P MCB DC 600V 125A overload circuit breaker for DC solar photovoltaics.
*Product photo is illustrative
TOMZN 10x38mm 1000V 10A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10x38mm 1000V 15A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10×38mm 1000V 20A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10×38mm 1000V 30A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
Fuse disconnector TOMZN DC 1P serves for retention of DC fuse 10x38mm. Suitable for electrical distribution of high voltage solar photovoltaics. It serves as a basic protection of gpV photovoltaic system.
*product photo is illustrative
Fuse parallel disconnector TOMZN DC 2P is used for retention of DC fuses 10x38mm. Suitable for electrical distribution of high voltage solar photovoltaics. It serves as the basic protection of the gpV photovoltaic system.
Fuse disconnector TOMZN 4P PV DC 1200V 32A is a device designed for solar switchboards. It is equipped with a flexible and durable rotating handle.
The TOMZN three-phase electricity meter with Wifi function is a modern device for monitoring electricity consumption. It features an intelligent bidirectional energy meter with timer function and kWh consumption monitoring.
*product photo is illustrative
Industrial power connectors DC, QLB SurLok 200A 1000V. 2 pairs (female + male) of cable connectors included.
Professional 1/2" digital torque wrench with high accuracy and practicality that displays real-time tightening torque values in ft-lb and Nm.
The device measures the actual parameters of batteries, power supplies, chargers, etc.
Regulated laboratory power supply with precisely adjustable DC current and voltage. Not intended for battery charging. Damage to the product will occur in the event of such a sustained load.
Device designed for charging LiFePO4 and Li-Ion cells.
Device designed for charging LiFePO4 and Li-Ion cells.
We recommend plugging this charger into an electrical circuit protected by a circuit breaker with C characteristic.
Device designed for charging LiFePO4 and Li-Ion cells.
Device designed for charging LiFePO4 and Li-Ion cells.
TOMZN TPNL-32 C10 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
TPNL-32 C25 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
The TZG40-PV 1000VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 800VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 500VDC is a surge protection device with even faster protective response in the event of a lightning strike.
TZG40-C 275VAC is a device for surge protection of the network and lightning.
This jumper serves as a connecting material for LiFePo4 27Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePo4 105Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for Li-Ion 218Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 50Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 187Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 230Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 304Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for Li-Ion 100Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 120Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 134Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 32Ah cells.
This jumper serves as a connecting material for Li-Ion 58Ah cells.
Wired remote control LCD panel with anti-interference protection and LAN connection. For mivvyENERGY voltage converters.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.