- Temporarily unavailable
Charge/discharge battery tester DSF 20A 9-99V
DKDSF20
High precision battery discharge/charge testing device with a wide range of 9V-99V voltage detection.
Price: Kč15,899
Price excl. VAT: Kč13,140
Price excl. VAT: Kč13,140
Price history
Lowest price in the last 30 days before discount Kč15,899
2024-11-25
Battery charge and discharge tester
The DSF20 is a highly accurate tester for lead acid and lithium battery assemblies. It has a wide voltage detection range from 9V to 99V, so it can measure batteries of various capacities from 12V-84V. The maximum number of consecutive (Loop Index) charge and discharge cycles is 16. The tester has two operating modes: panel and online. You can check the measurement data directly on the LCD or via PC software.
- Input voltage: 220V AC50Hz/60Hz
- Power input: 900W
- Applicable batteries: lithium and lead acid battery packs
- Constant charging voltage: 9V~99V
- End discharge voltage: 9V ~ 99V
- Charging current: 0.5-10A (adjustable)
- Discharge current: 9V-21V: 0.5-10A (adjustable); 21V-99V: 0.5-20A (adjustable)
- Degree of protection: IP20
- Operating temperature: 0°C~40°C
- Storage temperature: -10°C~50°C
To manage battery testing via PC, install the necessary software.
Here you can download the program from the manufacturer of the DK tester.
See also documents such as declaration and certificates
High precision battery discharge/charge testing device with a wide range of 9V-99V voltage detection.
You might also like
The device measures the actual parameters of batteries, power supplies, chargers, etc.
Device designed for charging LiFePO4 and Li-Ion cells.
Device designed for charging LiFePO4 and Li-Ion cells.
8 other products in the same category:
TOMZN TPNL-32 C16 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
Soldering tip 900M-T-B with tip R=0,5mm for precision soldering, compatible with most traditional soldering stations and microsoldering stations.
Can be used to connect battery to other accessories.
This jumper serves as a connecting material for LiFePO4 304Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for parallel connection of EVE GRADE A+ LiFePo4 battery with 304Ah capacity and M6 adapters.
Device designed for charging LiFePO4 and Li-Ion cells.
This jumper serves as a connecting material for LiFePo4 105Ah cells. No need to buy AL-CU (CUPAL) washers.
